WiLoBlino
Application Scenarios
￭ General robot and IoT industry devices
￭ Environment sensor gateway
￭ Connectivity Gateway
￭ Base Project for makers
￭ Embedded multi-device system for students
￭ LoRa IoT projects
Specifications
ESP32 + Arduino + Lora E5
A product that unites many of the technologies that enthusiasts from the maker world use in their projects.
Wi Lo BL Ino
One board, 3 development worlds under the same USB:
Arduino – Lora E5 – ESP32
- Arduino compatible Shield
- Espressif ESP32 module on board
- Seeed Studio LoRa E5 module on board
Features
Arduino
Arduino (not included) compatible Shield:
ATmega328P 32KB Flash Memory, 16MHz
6x PWM Digital I/O Pins
6x Analog Input Pins
ESP32
2.4 GHz WiFi + Bluetooth® + Bluetooth LE module
Built around ESP32 series of SoCs, Xtensa® dualcore 32bit LX6 microprocessor
4/8/16 MB flash available
26 GPIOs, rich set of peripherals
LoRa E5
STM32WLE5JC microcontroller with RF LoRa integrated (SX126X)
Built around ARM Cortex M4 microprocessor
supports (G)FSK mode and LoRa.
I/O
All ESP, E5 and Arduino GPIOS are accessible from the top of the board to connect your sensors and actuators.
USB Switch Selector Mode
By selecting the device’s switch connectivity mode, you can connect your PC to the Arduino, Lora E5 or ESP.
Connectivity
￭ WiFi
2.4 GHz WiFi
￭ Bluetooth
Bluetooth® + Bluetooth LE module
￭ LoRa
62.5kHz, 125kHz, 250kHz, and 500kHz bandwidth can be used in LoRa® mode, making it suitable for the design of various IoT nodes, supporting EU868 and US915.
Technical documents
Downloadable PDFs
USB
uUSB Interface
Wifi & Bluetooth
WiFi SMA Connector
LoRa
SMA Connector
